Stunt Cage Honda CBR600f4i
The main element of motorcycle protection.
It is installed both on a city motorcycle and on a stunt bike.
A cage is installed to protect the plastic, engine and motorcycle frame when falling. Three-point fastening, high-quality materials. Installation is carried out in factory holes. Manufactured individually, for a motorcycle model. Easy to install.
Stunt cage is made of a single pipe. Diameter of 28 mm, wall is 3 mm.
The cage has classical geometry. The design is made so that the upper slider is as high as possible.
This prevents the motorcycle from tipping over. Usually cages fixation for this model of the motorcycle is located low and the bike is tipping over when it falls.
It is equipped with two damper sliders or simple cage sliders.
The distinctive feature of the MotoBSK cages is that the slider seat’s inner diameter is 35 mm, unlike most cages, where the seat is 22-27 mm.
The seat is usually broken while falling. And if you have a quick removable slider 22 mm with a drilled internal bolt 10 mm, then the slider has a wall with a thickness of only 5-8 mm.
Diameter of 35 mm, as it is in our cages, is much harder to loosen up. The support area is larger for the slider which is much more reliable.
All cage fasteners are installed through duralumin spencers – spacers between the frame and the cage.
Spencers-spacers differ in configuration for the stock frame and steel frame.
Cages are universal, installed both on the stock frame and steel.
The steel frame differs from the stock, but due to spacers, one cage can be installed on both stock and steel frames.
Polymeric color coating by customer request.
It is painted with powder paint (polymer).
Weight 7 kg.
* This MotoBSK stunt cage is copied very often. Be careful, beware of fakes!